configurazione oscam emu

[rickardsat]

salve vorrei leggere srg e tandberg sui 39 est tramite softkey ma non riesco, ho anche una scheda tv sat e non viene vista...chi mi aiuta nella configurazione? questi sono i mie file:

oscam.conf

[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1


[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linux
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
extended_cw_api = 1


[streamrelay]
stream_relay_enabled = 0


[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1


[newcamd]
port = 10001@
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1

oscam.server


[reader]
label = Tvsat
enable = 1
protocol = internal
Detect = CD
emmcache = 1,2,2
device = /dev/sci0
group = 2
caid = 0183D
ident = 0183D:000000,005411
rsakey =
blockemm-s = 0
blockemm-g = 1
blockemm-unknown




[reader]
label = cccam_server1
enable = 1
protocol = cccam
device = 192.168.0.254,12345
user = a66
password = b66
inactivitytimeout = 20
reconnecttimeout = 15
group = 1
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1

oscam.user

[account]
description = dvbapi
user = linux
group = 1,2,3,4

[stirich]

Prova la configurazione indicata da tro69 qui: http://www.maghreb-sat.com/forum/f12...tml#post435585 (post #295)
Per leggere la scheda tivusat dovrai aggiungere a questo di tro69 il tuo [reader] Tvusat nel file oscam.server munito della rsakey che da te manca (fai sapere se ce l'hai).

Se vuoi posso postarti la configurazione per doscam 0.25.

[rickardsat]

aggiorno dicendo che ho luce sia su tvsat che su cline, ancora buio su emu come svizzeri e tandberg... chi mi aiuta? grazie

posto la configurazione oscam server:

[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4 ,0000A8;090F:000000;0500:000000,030B00,023800,0211 10,007400,007800;1801:000000,001101;0604:000000;26 00:000000;FFFF:000000;0E00:000000;4AE1:000000;1010 :000000
group = 1
blockemm-g = 1


[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
group = 2


[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
group = 3


[reader]
label = oscam.keys
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
group = 4


[reader]
label = oscam.constant.cw
protocol = constcw
device = /etc/tuxbox/config/oscam.constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
group = 5


[reader]
label = CCcam1
description = none
protocol = cccam
device = xxx
user = xxx
password = xxxx
group = 1
cccversion = 2.1.4


[reader]
label = CCcam2
description = none
protocol = xxx
device = none
user = xxx
password = xxx
group = 1
cccversion = 2.1.4


[reader]
label = cccam3
description = none
protocol = xxxxx
device = none
user = xxxx
password = xxxx
group = 1
cccversion = 2.1.4

[reader]
label = Newcamd
description = Newcamd Example
protocol = newcamd
device = server,port
key = 0102030405060708091011121314
user = username
password = password
group = 1


[reader]
label = Camd3
protocol = camd35
device = server,port
user = user
password = pass
group = 1




[reader]
label = tvsat
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 183D
rsakey = xxxx
ecmnotfoundlimit = 500
detect = cd
mhz = 540
cardmhz = 2700
group = 2
blockemm-unknown = 1
blockemm-g = 1
ratelimitecm = 100
ratelimittime = 4000
srvidholdtime = 1000

[stirich]

Rick, nascondi subito con delle xxx gli user e passw delle tue cline (se sono quelle vere) altrimenti altri te le possono copiare e di conseguenza il server le bloccherà trovando diversi utenti collegati alla stessa cline.

[rickardsat]

grazie!! non riesco a capire per quale motivo non aggancia l'emu

[stirich]

grazie!! non riesco a capire per quale motivo non aggancia l'emu

Non ti ho risposto perché con oscam non ho testato direttamente gli svizzeri, se vuoi posso indicarti per fare tutto con doscam 0.25 (svizzeri+ tivusat+ cline) devi solo installare la doscam 0.25, la oscam che hai ora puoi lasciarla così com'è, nell'eventualità se non è attiva non crea conflitti.

[rickardsat]

ti ringrazio ma doscam grazie all'iuto dell post sono riuscito a configurarlo bene!! ora ho scoperto che questa cam non supporta l emu sui 39est e quindi volevo provare con oscam emu

[tro69]

Ma hai scaricato osemu? è in funzione?

[rickardsat]

Ma hai scaricato osemu? è in funzione?

si tutto ok ho risolto era la versione di osemu che dava problemi!

per completezza riporo la mia configurazione funzionante:

oscam.conf

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 200
preferlocalcards = 1


[dvbapi]
enabled = 1
pmt_mode = 1
user = linuxsatsupport




[webif]
httpport = 16402
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1

oscam.server

[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 1
blockemm-g = 1


[reader]
label = tvsat
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 183D
rsakey = xxx
ecmnotfoundlimit = 500
detect = cd
mhz = 540
cardmhz = 2700
group = 2
blockemm-unknown = 1
blockemm-g = 1
ratelimitecm = 100
ratelimittime = 4000
srvidholdtime = 1000


[reader]
label = server1
protocol = cccam
device =xxxx,xxx
user = xxx
password = xxx
inactivitytimeout = 30
group = 1
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1


[reader]
label = server2
protocol = cccam
device =xxx,xxx
user = xxx
password = xxx
inactivitytimeout = 30
group = 1
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1


[reader]
label = server3
protocol = cccam
device = xxx,xxx
user = xxx
password = xxx
inactivitytimeout = 30
group = 1
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1

oscam.user

[account]
user = linuxsatsupport
monlevel = 1
keepalive = 1
group = 1
cccmaxhops = 3

ps: ho usato la "softcam-camd-oscam-emu_11.306-FOR-OpenPli"

[rickardsat]

per quanto riguarda le constant.cw e le biss key come procedo? devo fare qualche modifica?? fatemi sapere grazie